Services to Be Provided  

The Contractor agrees to perform the following tasks as part of the Appliance Repair Services:

a. Diagnosis & Troubleshooting  

• Identifying issues with kitchen, laundry, and other household appliances.

• Using diagnostic tools and software to pinpoint mechanical and electrical failures.

• Providing accurate assessments and recommending repair solutions.

b. Appliance Repair & Maintenance  

• Repairing and replacing damaged or faulty components in refrigerators, ovens, dishwashers, washing machines, dryers, and other appliances.

• Performing preventive maintenance to enhance appliance performance and longevity.

• Ensuring proper alignment, calibration, and secure installation of parts.

c. Installation of New Appliances  

• Properly installing and setting up household and commercial appliances.

• Connecting water lines, electrical wiring, and gas hookups (if licensed and permitted).

• Ensuring all installations comply with local codes and safety regulations.

d. Testing & Quality Assurance  

• Conducting final inspections and tests to verify proper appliance functionality.

• Ensuring all safety features and settings operate as intended.

• Educating clients on basic appliance operation and maintenance.

e. Special Repair & Service Requests (Upon Approval)  

• Handling emergency appliance repairs upon request.

• Performing complex repairs on high-end or specialty appliances.

• Conducting warranty service work as required.
  

Equipment & Materials  

a. Contractor-Supplied Tools & Equipment  

The Contractor is expected to provide and maintain the following tools and materials unless otherwise specified by S-Club:

• Standard hand tools (screwdrivers, pliers, wrenches, multimeters, etc.).

• Specialized diagnostic tools and repair kits for appliance servicing.

• Safety gear (gloves, eye protection, voltage testers, etc.).

• Replacement parts (when applicable) or ability to source necessary parts.

b. S-Club-Supplied Equipment (if applicable)  

• In certain cases, S-Club may provide specialty tools or partsfor specific jobs.
  
  

  The Contractor is responsible for proper maintenance, return, and reporting of any damage to company-supplied equipment.

Work Quality & Performance Standards  

The Contractor must adhere to S-Club’s Quality Assurance Standards, ensuring: Accurate diagnosis and complete repairs for all assigned appliances. Compliance with safety and electrical standards to prevent hazards. Timely completion of work as scheduled. Professional and respectful communication with clients and S-Club representatives. Proper documentation and verification of completed work using the S Club App.

Reporting & Documentation  

To verify job completion, the Contractor must: Clock in and out via the S Club App for record-keeping. Upload before-and-after photos of repaired appliances for quality control. Submit a completed service report detailing the issue, diagnosis, and resolution.

Failure to Meet Expectations  

S-Club reserves the right to withhold payment or require rework at no additional cost if: The Contractor fails to fully complete the assigned repair. The client reports unresolved issues or additional damage. Required documentation is not submitted as proof of job completion. Repeated failures to meet expectations may result in contract termination.

Additional Work & Special Requests  

• All additional services (e.g., major component replacements, large-scale commercial appliance repairs) must be pre-approved by S-Club management.
  
  

  The Contractor must not accept direct payments or private repair jobs from S-Club clients without authorization.

Services to Be Provided

The Contractor agrees to perform the following tasks as part of the Duct Cleaning Services:

a.  Air Duct & Vent Cleaning

• Removing dust, debris, and contaminants from HVAC ductwork, vents, and returns.

• Inspecting air ducts for signs of mold, mildew, pests, and excessive buildup.

• Using industry-approved methods such as vacuuming, brushing, and air blasting to ensure thorough cleaning.

• Cleaning and disinfecting vent covers, grills, and registers.

b. Dryer Vent Cleaning

• Clearing lint and debris from dryer vents to improve airflow and reduce fire hazards.

• Ensuring proper ventilation and advising clients on maintenance frequency.

c.  HVAC System Component Cleaning (As Required)

• Cleaning blower motors, evaporator coils, and condenser coils if necessary.

• Inspecting filters and replacing them upon request.

 d. Mold & Allergen Mitigation (If Applicable)

• Applying antimicrobial treatments to air ducts if mold or bacterial growth is detected.

• Using HEPA-filtered vacuums and air scrubbers to minimize airborne allergens.

e. Post-Construction & Deep Cleaning Services (Upon Approval)

• Performing intensive duct cleaning following renovations or new construction.

• Removing construction dust, drywall debris, and contaminants from ventilation systems.
  

Equipment & Materials

a. Contractor-Supplied Equipment

The Contractor is expected to provide and maintain the following equipment unless otherwise specified by S-Club:

• High-powered vacuum systems and negative air machines.

• Rotary brushes, air whips, and compressed air tools for duct cleaning.

• HEPA-filtered vacuums for debris collection.

• Inspection cameras for assessing duct conditions.

• Disinfectants and antimicrobial treatments (if permitted and applicable).

• Personal protective equipment (PPE), including gloves, respirators, and safety glasses.

b. S-Club-Supplied Equipment (if applicable)

• In certain cases, S-Club may provide specialized duct cleaning tools or disinfectants.
  
  

  The Contractor is responsible for proper maintenance, return, and reporting of any damage to company-supplied equipment.

Work Quality & Performance Standards

The Contractor must adhere to S-Club’s Quality Assurance Standards, ensuring: Thorough removal of dust, lint, and contaminants from all ductwork and vents. No visible debris or obstructions in the HVAC system after cleaning. Safe and professional use of equipment to prevent damage to duct systems. Timely completion of workaccording to the assigned schedule. Proper disposal of contaminants and cleaning materials in compliance with environmental regulations. Completion of required checklists for each assignment (submitted via the S Club App).

Reporting & Documentation

To verify job completion, the Contractor must: Clock in and out via the S Club App for record-keeping. Upload before-and-after photos of ducts, vents, and HVAC components for quality assurance. Submit a completed job checklist confirming all assigned tasks were performed.

Failure to Meet Expectations

S-Club reserves the right to withhold payment or require rework at no additional cost if: The Contractor fails to fully complete the assigned duct cleaning. The client reports unsatisfactory work, such as remaining dust or obstructions. Required checklists, photos, or documentation are not submitted as proof of job completion.

Repeated failures to meet expectations may result in contract termination.

Additional Work & Special Requests

All additional services (e.g., HVAC repair, advanced mold remediation, air quality testing) must be pre-approved by S-Club management.

The Contractor must not accept direct payments or private jobs from S-Club clients without authorization.

Services to Be Provided

The Contractor agrees to perform the following tasks as part of the Emergency Restoration Services:

a. Water Damage Restoration

• Extracting standing water from affected areas using industrial-grade equipment.

• Removing damaged flooring, drywall, and insulation to prevent mold growth.

• Installing and operating dehumidifiers and air movers to dry out spaces.

• Cleaning and sanitizing surfaces to prevent bacteria and mold formation.

b. Fire & Smoke Damage Restoration

• Assessing fire-damaged structures and determining salvageable materials.

• Cleaning soot, smoke residue, and odors from walls, ceilings, and surfaces.

• Using specialized equipment to eliminate lingering smoke smells.

• Assisting in debris removal and property stabilization post-fire.

c. Mold Remediation & Prevention

• Identifying and removing mold-affected areas following safety protocols.

• Applying antimicrobial treatments to prevent mold regrowth.

• Setting up air scrubbers and HEPA vacuums to remove airborne spores.

d. Storm & Disaster Recovery

• Securing and boarding up damaged windows, doors, and roofs after storms.

• Removing fallen trees, debris, and hazardous materials.

• Assisting in structural drying and reconstruction planning.

e. Emergency Response & Mitigation (Upon Approval)

• Providing immediate response services in disaster situations (floods, fires, hurricanes, etc.).

• Coordinating with insurance adjusters, property owners, and service teams.

• Ensuring affected properties are stabilized before further restoration.
  

Equipment & Materials

a. Contractor-Supplied Equipment

The Contractor is expected to provide and maintain the following tools and materials unless otherwise specified by S-Club:

• Water extraction pumps, dehumidifiers, and air movers.

• HEPA vacuums and air scrubbers for mold and smoke remediation.

• Protective gear (respirators, gloves, hazmat suits, safety boots).

• Hand tools for demolition and restoration tasks.

• Cleaning agents, antimicrobial treatments, and odor neutralizers.

b. S-Club-Supplied Equipment (if applicable)

• In some cases, S-Clubmay provide specialized restoration tools or protective gear.
  
  

  The Contractor is responsible for proper maintenance, return, and reporting of any damage to company-supplied equipment.

Work Quality & Performance Standards

The Contractor must adhere to S-Club’s Quality Assurance Standards, ensuring: Immediate and professional response to emergency situations. Thorough water, fire, and mold damage mitigation to prevent further property loss. Proper use of restoration equipment for safety and efficiency. Timely completion of work based on emergency response guidelines. Compliance with environmental and industry standards for restoration. Completion of required checklists for each assignment (submitted via the S Club App).

Reporting & Documentation

To verify job completion, the Contractor must: Clock in and out via the S Club App for record-keeping. Upload before-and-after photos of restored areas for quality assurance. Submit a completed service report detailing the damage, mitigation process, and resolution.

Failure to Meet Expectations

S-Club reserves the right to withhold payment or require rework at no additional cost if: The Contractor fails to complete the assigned restoration work properly. The client reports unresolved issues, property damage, or inadequate mitigation. Required checklists, photos, or documentation are not submitted as proof of job completion. Repeated failures to meet expectations may result in contract termination.

Additional Work & Special Requests

All additional services (e.g., large-scale structural rebuilding, hazardous material cleanup, biohazard remediation) must be pre-approved by S-Club management.

The Contractor must not accept direct payments or private jobs from S-Club clients without authorization.

Services to Be Provided

The Contractor agrees to perform the following tasks as part of the Junk Removal Services:

a. General Junk Removal

• Collecting and removing household, office, and commercial junk, including furniture, appliances, electronics, and general waste.

• Sorting items to determine what can be donated, recycled, or properly disposed of.

• Ensuring proper lifting techniques and safe handling of heavy items.

b. Construction Debris Removal

• Removing leftover materials such as wood, drywall, metal, and concrete from renovation or construction sites.

• Properly sorting and disposing of construction debris according to local regulations.
  

c. Furniture & Appliance Removal

• • Safely removing and hauling away unwanted or old furniture.

• • Disconnecting and removing appliances while ensuring no damage to property.

• • Determining if items can be recycled, donated, or disposed of properly.

d. Yard Waste & Outdoor Junk Removal

• Collecting and disposing of leaves, branches, and other natural debris.

• Removing unwanted outdoor furniture, grills, sheds, or play structures.

• Properly sorting and disposing of waste according to environmental guidelines.
  

e. Special Requests & Hazardous Waste (Upon Approval Only)

• Handling special requests such as hoarder cleanouts, estate cleanouts, and large-scale junk removals.

• The Contractor is not permitted to handle hazardous materials (e.g., chemicals, asbestos, medical waste) unless pre-approved and certified.

Equipment & Materials

a. Contractor-Supplied Equipment

The Contractor is expected to provide and maintain the following equipment unless otherwise specified by S-Club:

• Truck or trailer capable of hauling large loads.

• Dollies, carts, and lifting straps for heavy items.

• Safety gear, including gloves, boots, masks, and back support belts.

• Tools for disassembling large furniture or appliances (e.g., screwdrivers, wrenches, saws).

• Tarps, bungee cords, and tie-downs for securing loads.

b. S-Club-Supplied Equipment (if applicable)

• In certain cases, S-Club may provide access to disposal bins, specialized hauling equipment, or protective gear.
  
  

  The Contractor is responsible for proper maintenance, return, and reporting of any damage to company-supplied equipment.

Work Quality & Performance Standards

The Contractor must adhere to S-Club’s Quality Assurance Standards, ensuring: Safe and efficient removal of all assigned junk and debris. Proper sorting and disposal following recycling and donation policies. No damage to client property during removal and transportation. Timely completion of work according to the assigned schedule. Completion of required checklists for each assignment (submitted via the S Club App).

Reporting & Documentation

To verify job completion, the Contractor must: Clock in and out via the S Club App for record-keeping. Upload before-and-after photos of removed junk for quality assurance. Submit a completed job checklist confirming all assigned tasks were performed.

Failure to Meet Expectations

S-Club reserves the right to withhold payment or require rework at no additional cost if: The Contractor fails to remove all assigned items. The client reports unsatisfactory work, such as incomplete removal or property damage. Required checklists, photos, or documentation are not submitted as proof of job completion.

Repeated failures to meet expectations may result in contract termination.

Additional Work & Special Requests

All additional services (e.g., demolition work, hazardous waste removal, large-scale cleanouts) must be pre-approved by S-Club management.

The Contractor must not accept direct payments or private jobs from S-Club clients without authorization.

Services to Be Provided

The Contractor agrees to perform the following tasks as part of the Maid Service:

a. General Cleaning Services

• Surface Cleaning: Dusting, wiping, and sanitizing furniture, countertops, and fixtures.

• Floor Cleaning: Vacuuming, sweeping, mopping, and spot-cleaning carpets and rugs.

• Trash Removal: Emptying garbage cans and disposing of waste in designated areas.

• Bathroom Sanitation: Cleaning sinks, toilets, bathtubs, showers, mirrors, and tile surfaces.

• Kitchen Cleaning: Wiping down appliances, disinfecting countertops, cleaning sinks, and mopping floors.

• Restocking Supplies: Replenishing cleaning supplies, paper products, soap, and other necessary items.

b. Deep Cleaning Services (as required)

• Carpet & Upholstery Cleaning: Treating stains, vacuuming, and deep-cleaning fabrics.

• Window Washing (Interior Only): Cleaning glass surfaces, wiping down frames, and removing streaks.

• Baseboards & Wall Spot Cleaning: Removing scuff marks and dirt accumulation.

• Appliance Cleaning: Deep cleaning inside ovens, refrigerators, microwaves, and dishwashers.

c. Move-In/Move-Out Cleaning

• Empty Property Cleaning: Ensuring vacant units or homes are thoroughly cleaned before or after a tenant’s stay.

• Cabinet & Drawer Cleaning: Wiping down and disinfecting storage spaces.

• Detailing Fixtures & Light Switches: Removing dust, stains, and buildup from small surfaces.

d. Special Projects (Upon Request & Pre-Approval)

• Post-Construction Cleanup: Removing dust, debris, and leftover materials from renovation projects.

• Laundry Services: Washing, drying, folding, and organizing clothes or linens (if requested).

• Organization & Decluttering: Assisting with tidying up, arranging household items, and optimizing space.
  

Equipment & Materials

a. Contractor-Supplied Equipment

The Contractor is expected to provide and maintain the following equipment unless otherwise specified byS-Club:

• High-quality vacuum cleaner, mop, broom, and dustpan.

• Microfiber cloths, sponges, scrub brushes, and dusters.

• Cleaning solutions for various surfaces (glass, wood, tile, stainless steel, etc.).

• Disinfectants, sanitizing sprays, and eco-friendly cleaning agents (where required).

• Protective gloves and any necessary personal protective equipment (PPE).

b. S-Club-Supplied Equipment (if applicable)

• In some cases,S-Club may provide specialized cleaning equipment for specific jobs.
  
  

  The Contractor is responsible for proper maintenance, return, and reporting of any damage to company-supplied equipment.

Work Quality & Performance Standards

The Contractor must adhere toS-Club’s Quality Assurance Standards, ensuring: Thorough cleaning of all assigned areas per company and client expectations. No visible dirt, dust, stains, or residues left behind. Odor-free, sanitized, and fresh spaces after cleaning. Timely completion of tasks according to the assigned schedule. Proper waste disposal following eco-friendly and client-specific guidelines. Completion of required checklists for each assignment (submitted via the S Club App).

Reporting & Documentation

To verify job completion, the Contractor must:

• Clock in and out via the S Club App for internal records and accountability.

• Upload before-and-after photos for quality assurance purposes.

• Submit a completed job checklist confirming all assigned tasks were performed.
  

Failure to Meet Expectations

S-Club reserves the right to withhold payment or require rework at no additional cost if:

• The Contractor fails to complete the assigned tasks according to the agreed scope of work.

• The client reports unsatisfactory work (e.g., unclean areas, overlooked details).

• Required checklists, photos, or documentation are not submitted as proof of job completion.

Repeated failures to meet expectations may result in termination of the contract.

Additional Work & Special Requests

• Any additional services (e.g., organizing, special projects, extended cleanings) must be approved in advance byS-Club management.
  
  

  The Contractor must not accept direct payments or side jobs fromS-Club clients without prior authorization.

Services to Be Provided

The Contractor agrees to perform the following tasks as part of the Maintenance Services:

a. General Maintenance & Repairs

• Inspecting, diagnosing, and repairing minor electrical, plumbing, and HVAC issues.

• Basic carpentry work, including repairing doors, windows, and cabinetry.

• Fixing and maintaining flooring, tiles, and drywall.

• Painting and touch-up work as needed.

• Replacing light fixtures, outlets, and switches.

• Installing or assembling furniture, shelving, or fixtures as required.

b.  General Maintenance & Repairs

• Inspecting, diagnosing, and repairing minor electrical, plumbing, and HVAC issues.

• Basic carpentry work, including repairing doors, windows, and cabinetry.

• Fixing and maintaining flooring, tiles, and drywall.

• Painting and touch-up work as needed.

• Replacing light fixtures, outlets, and switches.

• Installing or assembling furniture, shelving, or fixtures as required.

c. Plumbing Repairs & Maintenance

• Fixing leaks, replacing pipes, and repairing minor plumbing issues.

• Unclogging drains and ensuring proper water flow in sinks and toilets.

• Installing and repairing faucets, showerheads, and water heaters.

d. Electrical Work (Basic & Approved Tasks Only)

• Replacing fuses, resetting circuit breakers, and troubleshooting electrical issues.

• Installing or replacing light bulbs, fixtures, and smoke detectors.

• Ensuring compliance with electrical safety regulations.

e. HVAC Maintenance (Basic & Preventative Work Only)

• Replacing air filters and cleaning vents.

• Inspecting and troubleshooting minor HVAC issues (if certified).

• Adjusting thermostats and checking system efficiency.

f. Exterior & Grounds Maintenance

• Minor landscaping work, such as trimming hedges and clearing pathways.

• Repairing fences, decks, and outdoor structures.

• Gutter cleaning and maintenance (if applicable).

g. Emergency Repairs & Special Requests (Upon Approval)

• Responding to urgent maintenance calls (if available).

• Handling unexpected repairs that require immediate attention.

• Special projects requiring pre-approval from S-Club management.
  

Equipment & Materials

a. Contractor-Supplied Equipment

The Contractor is expected to provide and maintain the following tools and materials unless otherwise specified by S-Club:

• Basic hand tools (hammers, screwdrivers, pliers, wrenches, drills, saws, etc.).

• Ladders and safety gear as required.

• Plumbing tools (pipe wrenches, plungers, drain snakes, etc.).

• Electrical tools (voltage testers, wire strippers, screwdrivers, etc.).

• Painting supplies (brushes, rollers, drop cloths, etc.).

• Protective equipment (gloves, safety goggles, knee pads, etc.).

b. S-Club-Supplied Equipment (if applicable)

• In certain cases, S-Club may provide specialized tools and equipment for specific jobs.
  
  

  The Contractor is responsible for proper maintenance, return, and reporting of any damage to company-supplied equipment.

Work Quality & Performance Standards

The Contractor must adhere to S-Club’s Quality Assurance Standards, ensuring: Timely and professional completion of all assigned maintenance tasks. Proper troubleshooting and repair techniques to prevent recurring issues. Safe and compliant handling of all maintenance and repair work. Use of high-quality materials and adherence to industry standards. Clear and professional communication with clients and management. Completion of required checklists for each assignment (submitted via the S Club App).

Reporting & Documentation

To verify job completion, the Contractor must: Clock in and out via the S Club App for internal records and accountability. Upload before-and-after photos of repair or maintenance work for quality assurance. Submit a completed job checklist confirming all assigned tasks were performed.

Failure to Meet Expectations

S-Club reserves the right to withhold payment or require rework at no additional cost if: The Contractor fails to complete the assigned tasks according to the agreed scope of work. The client reports unsatisfactory work (e.g., incomplete repairs, safety violations, improper installations). Required checklists, photos, or documentation are not submitted as proof of job completion.

Repeated failures to meet expectations may result in termination of the contract.

7. Additional Work & Special Requests

• Any additional services (e.g., extensive repairs, structural modifications, major installations) must be approved in advance by S-Club management.
  
  

  The Contractor must not accept direct payments or side jobs from S-Club clients without prior authorization.

Services to Be Provided

The Contractor agrees to perform the following tasks as part of the Moving & Relocation Services:

a. Packing & Preparation

• Packing Household & Commercial Items: Securely wrapping, boxing, and labeling items for safe transport.

• Handling Fragile Items: Properly securing glass, electronics, and valuables to prevent damage.

• Disassembling Furniture: Taking apart furniture as needed for transportation, ensuring all hardware is stored properly.

• Organizing Packed Items: Arranging boxes and items for efficient loading and unloading.

b. Loading & Unloading

• Proper Heavy Lifting Techniques: Ensuring safe and proper lifting to avoid injury and damage.

• Securing Items in Moving Truck: Using straps, padding, and other materials to prevent shifting during transit.

• Unloading and Placement: Carefully unloading and placing furniture and boxes in the designated areas.

• Reassembling Furniture: Putting furniture back together upon arrival at the new location if required.

c. Transportation Assistance (if applicable)

• Following Pre-Determined Routes: Using GPS and company-provided instructions to ensure timely delivery.

• Driving Moving Vehicles (if authorized): Safely operating company or rental moving trucks when required.

• Compliance with Traffic & Safety Laws: Adhering to state and federal transportation regulations.

d. Post-Move Cleanup & Final Inspection

• Removing Packing Materials & Trash: Disposing of boxes, plastic wrap, and other debris appropriately.

• Inspecting Delivered Items: Checking for damages and verifying all client belongings were delivered.

• Client Walkthrough & Final Confirmation: Ensuring the client is satisfied with the placement of items and reporting any issues.

e. Special Moving Services (Upon Request & Pre-Approval)

• Long-Distance Moving Assistance: Coordinating moves across state lines or extended distances.

• Storage & Warehousing Services: Assisting in organizing items for temporary storage.

• Specialty Item Handling: Transporting large or delicate items such as pianos, antiques, or artwork.
  

Equipment & Materials

a. Contractor-Supplied Equipment

The Contractor is expected to provide and maintain the following equipment unless otherwise specified by S-Club:

• Moving dollies, hand trucks, and furniture sliders to safely transport heavy items.

• Packing tape, moving blankets, and protective wrap to secure and protect items.

• Straps and tie-downs for securing items inside moving trucks.

• Basic tools (screwdrivers, wrenches, pliers, and drills) for assembling and disassembling furniture.

• Personal protective equipment (PPE): Gloves, back support belts, and safety shoes to prevent injury.

b. S-Club-Supplied Equipment (if applicable)

• In some cases, S-Club may provide moving trucks, additional protective gear, or specialty moving equipment.

The Contractor is responsible for proper maintenance, return, and reporting of any damage to company-supplied equipment.

Work Quality & Performance Standards

The Contractor must adhere to S-Club’s Quality Assurance Standards, ensuring: Safe and damage-free handling of all items. Proper organization and efficient moving techniques to minimize time and risk. Timely completion of tasks in accordance with the assigned schedule. Professional and respectful interactions with clients and coworkers. Completion of required checklists for each assignment (submitted via the S Club App).

Reporting & Documentation

To verify job completion, the Contractor must: Clock in and out via the S Club App for internal records and accountability. Upload before-and-after photos of moved items to ensure quality control. Submit a completed job checklist confirming all assigned tasks were performed.

Failure to Meet Expectations

S-Club reserves the right to withhold payment or require rework at no additional cost if: The Contractor fails to complete the assigned tasks according to the agreed scope of work. The client reports unsatisfactory work (e.g., damaged items, delays, improper handling). Required checklists, photos, or documentation are not submitted as proof of job completion.

Repeated failures to meet expectations may result in termination of the contract.

Additional Work & Special Requests

• Any additional services (e.g., extended moving support, large-scale relocation projects) must be approved in advanceby S-Club management.
  
  

  The Contractor must not accept direct payments or side jobs from S-Club clients without prior authorization.

Services to Be Provided

The Contractor agrees to perform the following tasks as part of the Plumbing & Electrical Services:

a. Plumbing Services

• Diagnosing, repairing, and replacing faulty plumbing components, including pipes, faucets, water heaters, and fixtures.

• Installing, repairing, and maintaining water supply lines, drainage systems, and sewage connections.

• Unclogging sinks, toilets, and drains using approved tools and techniques.

• Detecting and fixing leaks in water and gas lines (if properly licensed).

• Installing and replacing water filtration systems, sump pumps, and garbage disposals.

• Ensuring all work complies with local and national plumbing codes.

b. Electrical Services

• Installing, maintaining, and repairing electrical wiring, outlets, switches, circuit breakers, and lighting fixtures.

• Troubleshooting electrical systems to identify and correct faults safely.

• Upgrading electrical panels and ensuring proper load distribution.

• Installing and repairing ceiling fans, exhaust fans, and other electrical appliances.

• Ensuring compliance with all electrical safety standards and local codes.

• Working with low-voltage systems, including doorbells, intercoms, and security cameras (if applicable).

c. Emergency Repairs & Special Requests (Upon Approval)

• Responding to emergency plumbing or electrical failures that require immediate attention.

• Handling specialized repair work, such as high-voltage electrical repairs or large-scale plumbing installations (if properly certified and approved).

• Performing safety inspections and making recommendations for upgrades or preventive maintenance.
  

Equipment & Materials

a. Contractor-Supplied Tools & Equipment

The Contractor is expected to provide and maintain the following tools and materials unless otherwise specified by S-Club:

• Plumbing tools (pipe wrenches, plungers, drain augers, pipe cutters, soldering kits, etc.).

• Electrical tools (multimeters, wire strippers, voltage testers, conduit benders, etc.).

• Power tools for cutting, drilling, and securing fixtures.

• Safety gear (gloves, insulated tools, safety goggles, and protective clothing).

• Necessary wiring, fittings, and connectors for standard repair jobs.

b. S-Club-Supplied Equipment (if applicable)

• In some cases, S-Club may provide specialized tools, replacement parts, or equipment for specific jobs.
  
  

  The Contractor is responsible for proper maintenance, return, and reporting of any damage to company-supplied equipment.

Work Quality & Performance Standards

The Contractor must adhere to S-Club’s Quality Assurance Standards, ensuring: Accurate diagnosis and complete repairs for all assigned plumbing and electrical issues. Compliance with local plumbing and electrical codes to ensure safety. Timely completion of work as scheduled. Professional and respectful communication with clients and S-Club representatives. Proper documentation and verification of completed work using the S Club App.

Reporting & Documentation

To verify job completion, the Contractor must: Clock in and out via the S - Club App for record-keeping. Upload before-and-after photos of repair or installation work for quality control. Submit a completed service reportdetailing the issue, diagnosis, and resolution.

Failure to Meet Expectations

S-Club reserves the right to withhold payment or require rework at no additional cost if: The Contractor fails to fully complete the assigned repair. The client reports unresolved issues or additional damage. Required checklists, photos, or documentation are not submitted as proof of job completion. Repeated failures to meet expectations may result in contract termination.

Additional Work & Special Requests

Services to Be Provided

The Contractor agrees to perform the following tasks as part of the Site Operations Services:

a. General Site Maintenance & Facility Upkeep

• Conducting regular site inspections to identify and address maintenance needs.

• Performing minor repairs, such as patching walls, fixing doors, and replacing light fixtures.

• Ensuring all tools, equipment, and workspaces are clean and organized.

b. Equipment & Supply Management

• Checking, maintaining, and ensuring operational readiness of tools and equipment.

• Transporting, setting up, and dismantling site equipment as needed.

• Managing inventory and replenishing supplies when necessary.

c. Logistics & Coordination

• Assisting with deliveries, unloading shipments, and distributing materials to proper locations.

• Coordinating site activities to optimize workflow and efficiency.

• Monitoring and enforcing safety protocols for site workers and visitors.

d. Site Compliance & Safety

• Ensuring all work performed follows OSHA, state, and local safety regulations.

• Inspecting and maintaining personal protective equipment (PPE) and emergency response materials.

• Identifying and reporting hazards or violations to supervisors.

e. Special Tasks & Emergency Support (Upon Approval)

• Providing immediate assistance in case of power outages, system failures, or unexpected issues.

• Handling urgent facility maintenance tasks to minimize downtime.

• Assisting in site-specific projects requiring additional operational support.

Equipment & Materials

a. Contractor-Supplied Equipment

The Contractor is expected to provide and maintain the following tools and materials unless otherwise specified by S- Club:

• Basic hand tools (screwdrivers, wrenches, pliers, utility knives, etc.).

• Power tools (drills, saws, grinders, etc.) if required.

• Personal protective equipment (PPE) including gloves, safety glasses, and steel-toe boots.

• Measuring devices and diagnostic tools for maintenance tasks.

• Work vehicle for transportation of tools and supplies (if necessary).

b. Service Club-Supplied Equipment (if applicable)

• In certain cases, S- Club may provide specialized tools, equipment, or site-specific materials.

The Contractor is responsible for proper maintenance, return, and reporting of any damage to company-supplied equipment.

Work Quality & Performance Standards

The Contractor must adhere to S-Club’s Quality Assurance Standards, ensuring: Prompt and efficient completion of all assigned maintenance and operational tasks. Full compliance with safety and regulatory requirements. Proper handling, storage, and organization of tools and materials. Clear and professional communication with team members and management. Completion of required checklists for each assignment (submitted via the S- Club App).

Reporting & Documentation

To verify job completion, the Contractor must: Clock in and out via the S-Club App for internal records. Upload before-and-after photos of maintenance work when applicable. Submit a completed task checklist confirming all assigned duties were performed.

Failure to Meet Expectations

Service Club reserves the right to withhold payment or require rework at no additional cost if: The Contractor fails to complete site maintenance, logistics, or operational support tasks. The client or management reports issues related to incomplete work, safety concerns, or inefficiencies. Required checklists, photos, or documentation are not submitted as proof of job completion. Repeated failures to meet expectations may result in contract termination.

Additional Work & Special Requests

All additional services (e.g., heavy equipment operation, advanced mechanical repairs, major site modifications)must be pre-approved by Service Club management.

The Contractor must not accept direct payments or private jobs from S- Club clients without authorization.

Services to Be Provided

The Contractor agrees to perform the following tasks as part of the Tile and Carpet Cleaning Services:

a. Tile Cleaning & Restoration

• Surface Cleaning: Removing dirt, stains, and grime from tile floors, walls, and surfaces.

• Deep Cleaning & Scrubbing: Using professional-grade equipment to restore tile brightness.

• Grout Cleaning & Sealing: Removing mold, mildew, and embedded dirt from grout lines and applying a protective sealant.

• Polishing & Buffing: Enhancing the shine and durability of tile surfaces.

b. Carpet & Rug Cleaning

• Vacuuming & Pre-Treatment: Removing loose dirt, debris, and applying stain-removal treatments.

• Steam Cleaning & Hot Water Extraction: Deep cleaning carpets using industry-approved methods.

• Dry Cleaning & Encapsulation: Using low-moisture techniques for delicate or high-traffic areas.

• Spot & Stain Removal: Targeting tough stains such as pet stains, wine, and dirt buildup.

• Odor Elimination & Deodorizing: Using eco-friendly solutions to neutralize odors and refresh carpets.

c. Upholstery & Fabric Cleaning (If Applicable)

• Vacuuming & Spot Cleaning: Removing dust, dirt, and minor stains from upholstery.

• Steam Cleaning & Fabric Protection: Deep cleaning sofas, chairs, and other fabric-covered surfaces.

• Deodorizing & Sanitizing: Applying treatments to maintain freshness and hygiene.

d. Special Cleaning Services (Upon Request & Pre-Approval)

• Post-Construction Cleanup: Removing dust, debris, and residues from tiles and carpets after renovation work.

• Water Damage Restoration: Extracting water, drying, and cleaning affected carpets and flooring.

• Anti-Allergen & Eco-Friendly Treatments: Using hypoallergenic and chemical-free cleaning solutions.
  

Equipment & Materials

a. Contractor-Supplied Equipment

The Contractor is expected to provide and maintain the following equipment unless otherwise specified by S-Club:

• Professional carpet cleaning machine (hot water extraction or steam cleaner).

• Tile and grout cleaning machine, scrubbers, and brushes.

• Industrial-grade vacuums with HEPA filters.

• Eco-friendly cleaning solutions for different surfaces.

• Grout sealer, stain removers, and deodorizing treatments.

• Protective gloves, knee pads, and other personal protective equipment (PPE).

b. S-Club-Supplied Equipment (if applicable)

• In some cases, S-Club may provide specialized cleaning equipment for specific jobs.
  
  

  The Contractor is responsible for proper maintenance, return, and reporting of any damage to company-supplied equipment.

Work Quality & Performance Standards

The Contractor must adhere to S-Club’s Quality Assurance Standards, ensuring: Thorough cleaning of all assigned tile, grout, carpet, and fabric surfaces. No visible dirt, stains, streaks, or odors after cleaning. Safe and proper use of cleaning solutions and machinery. Timely completion of tasks according to the assigned schedule. Proper disposal of cleaning materials in compliance with environmental regulations. Completion of required checklists for each assignment (submitted via the S Club App).

Reporting & Documentation

To verify job completion, the Contractor must: Clock in and out via the S Club App for internal records and accountability. Upload before-and-after photos of cleaned areas for quality assurance. Submit a completed job checklist confirming all assigned tasks were performed.

Failure to Meet Expectations

S-Club reserves the right to withhold payment or require rework at no additional cost if: The Contractor fails to complete the assigned tasks according to the agreed scope of work. The client reports unsatisfactory work(e.g., visible stains, missed areas, poor odor removal). Required checklists, photos, or documentation are not submitted as proof of job completion. Repeated failures to meet expectations may result in termination of the contract.

Additional Work & Special Requests

Contractor must not accept direct payments or side jobs from S-Club clients without prior authorization.

Services to Be Provided

The Contractor agrees to perform the following tasks as part of the Window Washing Services:

a. Residential & Commercial Window Cleaning

• Cleaning exterior and interior windows of residential and commercial buildings.

• Removing dirt, dust, water stains, fingerprints, and other debris.

• Using appropriate cleaning solutions, tools, and techniques to achieve a streak-free finish.

b. High-Rise & Specialty Window Cleaning (if applicable)

• Cleaning windows of multi-story buildings using professional-grade equipment.

• Operating lifts, scaffolding, or rope access systems in compliance with safety regulations.

• Ensuring all necessary harnesses and protective gear are worn at elevated heights.

c. Glass Stain & Debris Removal

• Treating and removing hard water stains, mineral deposits, and environmental buildup.

• Using eco-friendly chemicals and proper techniques to restore glass clarity.

d. Frame & Screen Cleaning

• Wiping down and removing dirt from window frames, ledges, and tracks.

• Removing and cleaning window screens to maintain proper ventilation and hygiene.

e. Skylight & Glass Door Cleaning

• Washing and polishing glass doors, patio enclosures, skylights, and other transparent structures.

f. Safety & Compliance

• Adhering to OSHA, local, state, and federal safety standards for working at heights.

• Using fall protection gear and ensuring all equipment is in good working condition.

• Following company-approved safety procedures, including proper handling of ladders and harnesses.
  

Equipment & Materials

a. Contractor-Supplied Equipment

The Contractor is expected to provide and maintain the following equipment unless otherwise specified by S-Club:

• Squeegees, water-fed poles, microfiber cloths, and extension poles.

• Ladders, harnesses, and fall protection gear.

• Eco-friendly cleaning solutions, soaps, and water filtration systems (if required).

• Window scrapers, soft brushes, and other tools for effective cleaning.

b. S-Club-Supplied Equipment (if applicable)

• In specific cases, S-Club may provide specialized equipment for certain jobs (e.g., high-rise window washing platforms).
  
  

  

  The Contractor is responsible for properly maintaining, returning, and reporting any damage to company-supplied equipment.

Work Quality & Performance Standards

The Contractor must adhere to S-Club’s Quality Assurance Standards, ensuring: Streak-free, smudge-free window surfaces upon completion. No visible residues or watermarks left on glass, sills, or frames. Timely completion of work according to the assigned schedule. Proper disposal of cleaning solutions and materials in an eco-friendly manner. Completion of required checklists for each assignment (submitted via the S Club App).

Reporting & Documentation

To verify job completion, the Contractor must: Clock in and out via the S Club App for time tracking and internal records. Upload before-and-after photos of cleaned windows for quality assurance. Submit a completed job checklist confirming all required tasks were performed.

Failure to Meet Expectations

S-Club reserves the right to withhold payment or require rework at no additional cost if: The Contractor fails to complete the job according to the agreed scope of work. The client reports unsatisfactory work (e.g., streaks, incomplete sections). Required checklists, photos, or documentation are not submitted as proof of job completion.

Repeated failures to meet expectations may result in termination of the contract.

Additional Work & Special Requests

• Any additional services (e.g., post-construction window cleaning, storm window maintenance) must be approved in advanceby S-Club management.
  
  

  The Contractor must not accept direct payments or side jobs from S-Club clients without prior authorization.