Exterior Cleaning Technician Checklist

1. House Exterior Power Washing & Soft Washing

◻ Inspect exterior surfaces for dirt, mold, mildew, and structural damage before starting

◻ Select the appropriate cleaning method (power washing or chemical soft washing)

◻ Apply cleaning solution to break down dirt, mold, and mildew

◻ Use proper pressure settings to avoid surface damage

◻ Rinse thoroughly to remove residue and ensure a clean finish

◻ Conduct a final inspection for streaks, missed spots, or remaining buildup

2. Driveway & Sidewalk Cleaning

◻ Assess surface type (concrete, asphalt, brick, or stone) for appropriate pressure setting

◻ Pre-treat oil stains, tire marks, and algae buildup with degreaser or cleaning agent

◻ Perform power washing, ensuring even coverage to prevent streaking

◻ Rinse thoroughly and check for any remaining stains or discoloration

3. Deck & Patio Cleaning

◻ Inspect wood, composite, stone, or concrete surfaces for damage or wear

◻ Use appropriate cleaning solution and pressure to remove stains, mold, and weather damage

◻ Scrub or agitate problem areas to enhance cleaning effectiveness

◻ Rinse thoroughly and allow surfaces to dry completely

4. Fence Cleaning

◻ Identify fence material (wood, vinyl, or metal) to determine the safest cleaning method

◻ Apply soft washing chemicals or power wash at an appropriate pressure level

◻ Remove dirt, algae, and discoloration without damaging the surface

◻ Rinse and inspect for even cleanliness

5. Roof Soft Washing

◻ Assess roof type (shingles, tile, or metal) for proper cleaning solution application

◻ Apply low-pressure chemical wash to remove moss, algae, and black streaks

◻ Allow cleaning solution to work, then rinse carefully to avoid damage

◻ Inspect for any remaining stains or areas needing additional treatment

6. Gutter Cleaning & Soft Washing

◻ Remove leaves, debris, and buildup from gutters and downspouts

◻ Flush gutters with water to ensure proper drainage

◻ Soft wash gutter exteriors to remove black streaks and mildew

◻ Inspect gutters for damage or necessary repairs

7. Commercial Building Washing

◻ Assess storefronts, office buildings, hotels, and warehouses for dirt and grime buildup

◻ Use power or soft washing as needed to maintain a professional appearance

◻ Clean signage, awnings, and entryways for enhanced curb appeal

◻ Perform a final quality check to ensure all surfaces are clean

8. Garage & Parking Lot Cleaning

◻ Pre-treat grease, oil, and dirt buildup with an appropriate cleaning solution

◻ Power wash parking lots and garages using proper pressure settings

◻ Ensure removal of gum, oil stains, and grime from concrete or asphalt surfaces

◻ Rinse thoroughly and inspect for missed spots

9. Restaurant & Dumpster Pad Cleaning

◻ Remove grease, food spills, and bacterial buildup from outdoor kitchen areas

◻ Power wash dumpster pads to eliminate odors and harmful bacteria

◻ Apply degreaser or disinfectant for deep cleaning and sanitation

◻ Rinse and inspect for any remaining buildup

10. Heavy Machinery & Equipment Power Washing

◻ Inspect machinery (construction equipment, tractors, forklifts, trucks) for areas requiring deep cleaning

◻ Use high-pressure washing to remove mud, grease, and industrial buildup

◻ Apply degreasing agents as necessary for thorough cleaning

◻ Perform a final check for any remaining contaminants

11. Hot Water Power Washing

◻ Use high-temperature pressure washing for removing stubborn oil, grease, and stains

◻ Ensure proper handling of equipment to prevent damage to surfaces

◻ Rinse thoroughly and check for any remaining residues

12. Pool Cleaning & Maintenance

◻ Vacuum pool bottom and skim debris from the surface

◻ Brush pool walls and clean filters to remove buildup

◻ Balance water chemistry by adjusting pH, chlorine, and other chemical levels

◻ Remove algae growth and ensure water clarity

13. Final Inspection & Clean-Up

◻ Ensure all requested cleaning services have been completed to the client’s satisfaction

◻ Double-check for any missed spots or remaining buildup

◻ Clean up all hoses, equipment, and work materials from the site

◻ Conduct a final walkthrough with the client

◻ Obtain client confirmation/signature for job completion