Plumbing & Electrical Technician Checklist
1. Initial Assessment & Safety Measures
◻ Confirm job details and scope of work with the client.
◻ Inspect the site to identify any potential hazards.
◻ Ensure proper personal protective equipment (PPE) is worn.
◻ Turn off necessary utilities (water, electricity, gas) before starting work.
◻ Verify compliance with local building codes and safety regulations.
2. Plumbing Services
General Plumbing Repairs & Maintenance
◻ Inspect and repair leaks, drips, and burst pipes.
◻ Clear clogged drains and check for blockages.
◻ Ensure proper water pressure and pipe connections.
Drain Cleaning & Hydro Jetting
◻ Use high-pressure hydro jetting to remove debris and grease.
◻ Inspect drains for signs of wear, corrosion, or damage.
◻ Test drainage flow after cleaning to confirm effectiveness.
Water Heater Installation & Repair
◻ Assess water heater condition and determine repair or replacement needs.
◻ Install or replace tank/tankless water heaters according to manufacturer guidelines.
◻ Check gas or electrical connections for safety and efficiency.
Sewer Line Inspection & Repair
◻ Conduct camera inspections to locate blockages or damage.
◻ Perform necessary repairs or replacements on damaged sewer lines.
◻ Test sewer lines for leaks and ensure proper flow.
Fixture Installation & Replacement
◻ Install or replace faucets, sinks, toilets, and garbage disposals.
◻ Ensure all connections are leak-free and functioning properly.
◻ Clean and test newly installed fixtures for customer satisfaction.
Gas Line Installation & Leak Detection
◻ Conduct safety inspections before installing gas lines.
◻ Detect and repair gas leaks following safety regulations.
◻ Verify proper pressure and secure connections.
3. Electrical Services
General Electrical Repairs & Troubleshooting
◻ Diagnose and fix faulty outlets, flickering lights, and circuit issues.
◻ Replace damaged wiring or components as needed.
◻ Test electrical systems to confirm safety and efficiency.
Lighting Installation & Upgrades
◻ Install and repair indoor and outdoor lighting fixtures.
◻ Upgrade to energy-efficient LED lighting if requested.
◻ Ensure all connections are secured and properly grounded.
Panel Upgrades & Circuit Breaker Replacement
◻ Inspect and upgrade electrical panels as necessary.
◻ Replace outdated circuit breakers with up-to-code models.
◻ Test circuit loads to ensure system stability.
Outlet, Switch & GFCI Installation
◻ Install or replace outlets, dimmers, and switches.
◻ Ensure GFCI protection in wet areas for safety compliance.
◻ Verify proper grounding and voltage output.
Ceiling Fan & Exhaust Fan Installation
◻ Install and wire ceiling fans, bathroom exhaust fans, and attic fans.
◻ Secure mounting brackets and ensure proper operation.
◻ Check for balanced airflow and noise levels.
Wiring & Rewiring Services
◻ Install new wiring for remodels, additions, or new construction.
◻ Upgrade old or damaged wiring to meet modern safety standards.
◻ Label and document new electrical configurations for future reference.
4. Final Inspection & Job Completion
◻ Conduct a final walkthrough to ensure all work meets quality and safety standards.
◻ Confirm with the client that all requested services were completed.
◻ Test all plumbing and electrical components for proper operation.
◻ Clean the work area and remove any leftover materials or debris.
◻ Obtain the client’s signature for job completion confirmation.
Final Confirmation
Contractor Name: ___________________________
Date: ____________________________
Signature: ________________________
Client Name: ___________________________
Date: ____________________________
Signature: ________________________